ERB2 - Our new development with Intelligent Synchronization and FLARM-Interface
The technology carries on - so we developed the new ERB2-H for you. With LEDs of the newest generation we were able to boost the brightness of about 25%. Simultaneously we reduced the power consumption remarkably. This makes an efficiency enhancement of about 50%!
As a matter of course all our LED position lights / ACLs are water and seawater resistent. Since the electronic parts are completely integrated in the ERB2-H, no black box or other items are needed.
Our ERB2-H complies with FAR23 regulations. Therefore experimantal constructors have a genuine alternative to Xenon-Flash lights.
The extremely bright, red rotating sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.
Like all our other ACLs, the ERB2-H is completely sealed in high grade optic plastic. As all electronic components are in the ERB, there is no additional place needed.
For easy connection, the ERB2-H is already provided with a 1,5/0,25 mm² four-wire-cable.
A detailed installation instruction and shrinking tubes are included.
As worlds first we integrated a FLARM-Interface in an anti collision light for motorized aircrafts in order to increase the visibility and therefore the safety in the airspace. The by the Power-FLARM unit provided signals increase the light pulses and therefore rises the attentiveness.
The integration of our well proven Intelligent Synchronization allowes a chronological sequence of power consumption for the connected anti collision lights and prevents battery and generator from becoming overloaded.
|Operating voltage||10 -17 volts D. C., typically: 12.8 - 13.4 volts (on board power supply)|
|Diameter||approx. 44 mm|
|Height||approx. 55 mm|
|Diameter-Flansch||approx. 63,5 mm|
|Weight||approx. 125 g incl. connecting cables|
|Warranty||5,000 operating hours or max. 3 years|