Combination of position light, taillight and anti collision light
The EPTA-LSA is the advancement of EPTA and impresses through its enormous higher brightness. The EPTA-LSA exceeds the requirements of FAR 23 by far.
The Thiesen EPTA-LSA will be mounted on the wingtips and is a combination of position light, tail-light and anti-collision light. Similar to the Thiesen EPL shape three aircraft lights are arranged in one position lamp. In addition to the functionality EPL (Electronic Position Light - red / green) it includes a tail-light (EPL Taillight) and an anti-collision light (ACL). The weight of EPTA-LSA is < 80 Grams.
Again, the built-in ACL in the EPTA-LSA is prepared for the intelligent synchronization.
The EPTA-LSA is embedded together with its integrated entire control element in high-optic, scratchresistant plastic module.
The high-performance LEDs produce a brilliant green and red light.
The wingtip lights are pre-wired for easy connection to a four-wire cable with at least 1.0 mm² conductor cross section. Easy installation by a central screw and additional gluing with silicone. Installation instructions and the shrink tubing required for assembly are included in the EPL.
The integration of our well proven Intelligent Synchronization allowes a chronological sequence of power consumption for the connected anti collision lights and prevents battery and generator from becoming overloaded.
Mounting-Instruction-EPTA-LSA.pdf
| Label | Description |
|---|---|
| Operating voltage | 10 - 17 Volts (DC), typically: 12.8 - 13.4 Volts (on-board power supply) |
| Wattage | 20 Watts (approx.) |
| Fuse | 5 Amp (fusible cut-out or automatic fuse) |
| Dimensions | 3.15 x 1.6 x 1.2 in / 80 x 40 x 30 mm (L x W x H) |
| Drill hole | 0.18 in / 4.5 mm |
| Weight | 76 Grams (approx.) including connecting cable |
| Warranty | 5.000 operating hours or max. 3 years |