ACL-UAV-LiPo for fuselage installation
Especially for small UAVs we developed for you the new ACL-UAV-LiPo. It is designed to work with a lightweight two cell LiPo accu used in model aircrafts. With a 2S-600mAh accu it can be operated for more than one hour.
In order not to compromise the accu lifespan, the ACL-UAV-LiPo has a integratet voltage monitoring.
By the use of LEDs of the newest generation, we were able to achieve a
brightness that would have been inconseivable a few years ago, whereby the power
consumption could be aligned to the requirements.
In addition the ACL-UAV-LiPO has a remote control input and can be switched on
and off by a radio control unit with a pulse lengt of 1-2 msec or by potential
free contacts (Relay).
The extremely bright, red rotating sequencing light flash has a beacon angle of 360° and is visible at 30° below and above the horizontal plane.
Because it is is completely sealed in high grade optic plastic like all our LED
position lamps/ACLs, it is water and even saltwater resistent.
For easy connection, the ACL is already provided with a 1.0/0.25 mm²
three-wire-cable. It can be installed on the fuselage or tail by its flange
footing and additinal silicone.
A detailed installation instruction and shrinking tubes are included.
Mounting-Instruction-ACL-UAV-LiPo.pdf
WiringDiagram-ACL-UAV-LiPo.pdf
| Label | Description |
|---|---|
| Color | Red |
| Operating voltage | 6.8 - 9 Volts (DC), LiPo-Akku 2S |
| Wattage | 5 Watts (approx.) |
| Interface | remote control input |
| Diameter | 1.7 in / 44 mm (approx.) |
| Height | 1.5 in / 39 mm (approx.) |
| Flange to flange | 2.4 in / 61 mm (approx.) |
| Drill hole | 0.18 in / 4.5 mm |
| Weight | 85 Grams (approx.) including connecting cables |
| Warranty | 5.000 operating hours or max. 3 years |