Brand new Taxi Light ETL50L
The new Thiesen Taxi light, the ETL50L, offers with it's new, innovative light concept the optimum illumination of the runway/taxiway while taxi.Due to the special height aspect ratio of the light beam (see figure) the infrastructure is optimally illuminated even in the peripheral areas, combined with a sharp concentration at peak efficiency. Power input of the ETL50L is only 30 watts, with the light output equal to a 90 watt halogen lamp. Again, Thiesen's state of the art molding techniques guaranties weather resistance and therefor can me mounted virtually anywhere on your aircraft including even the wheel pants!
The integrated anti-collision lighting of the ETL50L is also prepared for the intellegent synchronization.
The ETL50L can be easily connected to a cable of minimum 1.5 mm² cross section and is prewired with a 0.5 mm² highly flexible cord. An instructions manual and the required shrink tubing are included in the package.
Thanks to its advanced construction the ETL50 is water and seawater resistant and, therefore, ideally suited for use in seaplanes. It has temperature controls and is corrosion and UV resistant.
|Operating voltage||10 - 17 Volts (DC), typically 12.8 - 13.4 Volts (on-board power supply)|
|Wattage||30 Watts (approx.)|
|Fuse||5 Amp (fusible cut-out or automatic fuse)|
|Bore Diameter||2 in / 50 mm (approx.)|
|Installation depth||2.5 in / 65 mm (approx.)|
|Weight||105 Grams (approx.) includings connecting cables|
|Warranty||5.000 operating hours or max. 3 years|