Home |  Sitemap |  Contact 
Thiesen GmbH

EPL2is - Position Lights with Power-Beams

The well-proven EPL2 we have further developed now so that it is a full member of our system of "intelligent synchronization". In addition, the brightness of the Power Beams was raised by our special and new developed lens optics.
The EPL2is is embedded together with its integrated entire control element in high-optic, scratch resistant plastic module.
The EPL has a brilliant green and red light with modulated beacon impulse for better perception.
The wingtip lights are prewired to allow easy connection to a 2-lead cable of minimum 0.4 mm² cross section. Flanges allow simple fixture. In addition, it can be affixed to the fuselage or rudders by means of a silicon adhesive. An instructions manual and the shrink tubing required for the assembly are included in the EPL package.

 

Synchronisation cable

The EPL2is has an additional yellow synchronisation cable (yellow) to synchronise the left and right EPL2is (see wiring diagram). However it is not mandatory to connect the synchronisation cable. The EPL2is will also work without any problems if the cable is not connected. Is the snychronisation cable not connected (asynchronous mode), the ending of the yellow cable has to be isolated.

 

 

Technical Specifications

Color :   red and green
Operating voltage :   10 -17 volts D. C.,
typically: 12,8 - 13,4 volts (on board power supply)
Wattage :   each EPL approx. 4.5 watts
Dimensions :   89 x 45 x 34 mm (L x W x H)
Weight :   approx. 76 g with the connecting cable
Warranty :   5,000 operating hours or max. 3 years

 

 

Information

Wiring Diagram
Order Form

Updated: 28.04.2014 - 15:38