Home |  Sitemap |  Contact 
Elektronische PositinsLichter

 

ELL50L - Electronic Landing Light

Intelligent Synchronisation

 

To see and be seen

Brand new Landing Light ELL50L

The approved ELL50 is complemented by the new ELL50L. The ELL50L differs in a bigger cooling element, so it possible to get the maximum output of 30 watts even if the cooling conditions are bad.

The new Thiesen landing light ELL50L, with it's 50 mm (approx 2”) diameter, and less than 105 gram is much more compact than it's forerunner model ELL80, but has a much greater luminous efficiency. Power input of the ELL50L is only 30 watts, with the light output equal to a 90 watt halogen lamp. Again, Thiesen's state of the art molding techniques guaranties weather resistance and therefor can me mounted virtually anywhere on your aircraft including even the wheel pants!

 

The peculiarity of our landing light based on light-emitting diodes is the integrated anti-collision light (ACL). In this technique, the LEDs of the landing light can be controlled as an anti-collision light and is therefore integrated into our system of "intelligent synchronisation". Thus, the ELL acts both as a normal landing light as well as anti-collision light in flight direction (ie forward) and increases the visibility of the aircraft in flight significantly.

 

The ELL50L can be easily connected to a cable of minimum 1.5 mm² cross section and is prewired with a 0.5 mm² highly flexible cord. An instructions manual and the required shrink tubing are included in the package.

Thanks to its advanced construction the ELL50L is water and seawater resistant and, therefore, ideally suited for use in seaplanes. It has temperature controls and is corrosion and UV resistant.

 

 

Technical Specifications

Operating voltage :   10 -17 volts D. C.,
typically: 12.8 - 13.4 volts (on board power supply)
Wattage :   approx. 30 watts
Fuse : 5 ampere (fusible cut-out or automatic fuse)
Bore Diameter :   approx. 50 mm
Installation depth :   approx. 65 mm
Weight :   approx. 105 g incl. connecting cables
Warranty :   5,000 operating hours or max. 3 years

 

 

 

 

 

 

Updated: 16.06.2016 - 15:50